DAS wired addressable fire alarm · Sanjiang devices used in DAS systems
J-SAP-M-A860Addressable manual call point (with telephone jack) (CCC 2024)
Addressable manual call point with a tool-resettable (non-breakable) push plate and telephone indicator, complying with GB 19880-2024.
- Fully electronic coding; the address is written on site with a programmer
- After activation, the push plate is reset with a special tool; it does not break and can be reused many times
- Unique ID code, simple maintenance
Price on request
Addressable manual call point with a tool-resettable (non-breakable) push plate and telephone indicator, complying with GB 19880-2024.
Key features
- Fully electronic coding; the address is written on site with a programmer.
- After activation, the push plate is reset with a special tool; it does not break and can be reused many times.
- Unique ID code, simple maintenance.
- Upper cover / lower cover construction with an independent mounting base; protected against accidental removal.
J-SAP-M-A860 technical specifications
| Model | J-SAP-M-A860 |
|---|---|
| Operating environment | Temperature: -10 °C ÷ +55 °C, relative humidity ≤ 95% (40 °C ± 2 °C, non-condensing) |
| Operating voltage | 24 VDC bus |
| Operating current | Monitoring: <0.3 mA, alarm: <2 mA |
| Indicators | Status LED: flashes during polling, steady on in alarm; telephone LED: flashes when operating normally |
| Wiring method | Signal wire |
| Installation | 1.3 ÷ 1.5 m above the floor, surface-mounted on a wall |
| Dimensions | 89.4×89.4×42mm |
| Protection rating | IP30 |
| Coding type | Electronic coding |
| Standards | GB 19880-2024 |
| Brand | Sanjiang |
