DAS-FACP-A324/xxAddressable fire alarm control panel DAS-FACP-A324 (2–10 loops, 324 devices/loop)

Manufacturer's original documentation: DAS wired fire alarm catalogue (Tan Vien, 10/2026)

https://drive.google.com/file/d/1ESKG2ecYTZwIFTBWwFDQ2YItTvfPyMFM/view?usp=sharing

Schematic diagram of the DAS dedicated addressable fire alarm system connections

DAS-FACP-A324/xx addressable fire alarm control panel provides an intelligent, purpose-built addressable fire alarm solution, designed and manufactured to meet demanding project requirements such as: durable, stable operation in special environments — places with high humidity and corrosion resistance; fast, intuitive fire detection management for large-scale fire alarm systems with many devices. Expandable from 2 to 10 loops, with each loop able to connect and control 324 devices (detectors or modules alike), the product flexibly controls complex fire protection systems such as: high-pressure water mist fire suppression systems, smoke extraction systems, opening/closing of fire doors, fire curtains, and large, complex zoned fire protection systems such as thermal power plants, chemical plants and large industrial parks….

https://drive.google.com/file/d/1ESKG2ecYTZwIFTBWwFDQ2YItTvfPyMFM/view?usp=sharing

Technical specifications

1. 4.3-inch color LCD with a resolution of 480*272.
2. Number of loops of the control panel: 2 to 10 loops.
3. Number of devices per loop: 324 devices (detectors or modules alike)
4. Maximum loop cable length: 2000 m
5. The panel has built-in surge protection on the power line.
6. The panel has built-in surge protection circuits for each loop of the fire alarm panel.
7. Integrated Ethernet communication circuit with RJ45 connection to link up to 254 fire alarm panels, with no limit on transmission distance.
8. Integrated CAN communication interface: can connect 60 panels in the same system.
9. The panel can place calls and send fire alarm SMS messages to designated phone numbers.
10. The panel supports 5-status SMS messaging: fire alarm, fault, incident alarm …
11. The panel allows loop wiring in a branched (T-tap) topology combined with short-circuit isolator modules, ensuring stable operation, isolating the faulty or burnt section from the system, and keeping the other zones operating normally.
12. The panel integrates 6 to 22 forced-control units, each consisting of 2 on/off control buttons and a status indicator, to control peripheral equipment: fire pump systems, smoke exhaust fan systems, zone-selection fire suppression valves….
13. The panel integrates single control buttons to control peripheral equipment as required by any system: rolling shutters, fire curtains.
14. The panel integrates a printer that lists events.
15. The fire alarm panel uses non-polarized device technology, which makes installation, operation and maintenance of the system convenient.
16. The fire alarm panel has a large programming command library, making system programming convenient and simple and meeting most control requirements, similar to a PLC (Programmable Logic Controller).