KZJ-A55Eoutput (control) module

Addressable module that controls peripheral devices in case of fire: bells, sounder beacons, lifts, pumps, smoke extraction fans, fire dampers.

Non-polarized contacts
Address set with a handheld device
GB 16806 certified

Price on request

Original manufacturer documents: Specifications & instructions (EN) · Sanjiang CCC catalogue (EN) · CCC system installation guide (EN) · CCC catalogue – Vietnamese translation (part 1) · CCC catalogue – Vietnamese translation (part 2)

Output module controlling peripheral devices: fire bells, fire alarm sounder beacons, lift interlock, fire pumps, smoke extraction systems, fire dampers, electrical system interlock, etc.
GB 16806 certified.
The module address is set with a handheld programmer, which is very convenient and flexible.
The module contacts are non-polarized, which makes construction, installation, repair and maintenance very convenient.
12-month warranty

Technical specifications

Non-polarized module for controlling peripheral devices: controls bells, sounders, beacons, 24VDC valves, etc.
Weight: approx. 103 g (with base)
Dimensions: 86 × 86 × 40 mm (with base)
Standby current: < 1 mA, activated current: < 28 mA.
Open-circuit detection end-of-line resistor: 4.7 kΩ.
Housing made of high-grade ABS plastic.
12-month warranty

KZJ-A55E technical specifications

Model	KZJ-A55E
Type	Addressable input/output module (controls peripheral devices)
Standard	GB 16806-2006
Operating voltage	Loop 24 V; non-polarized two-wire bus
Operating current	Standby < 1 mA; activated < 28 mA
Output power	DC 34 V / 1.5 A / 25 ms or DC 24 V / 18 mA
Output type	Active pulse or active hold
Input	Normally open or normally closed, with line supervision
End-of-line resistor	47 kΩ
Addressing	Electronic address, occupying 1 address in the range 1–324
Environment	−10 °C to +55 °C; humidity ≤ 95 % (40 °C ± 2 °C, non-condensing)
Dimensions	86 × 86 × 40 mm (with base)
Weight	Approx. 103 g (with base)