J-SAP-M-A62KEConventional manual call point

Sanjiang conventional manual call point, passed fire-protection equipment inspection in Vietnam, resettable after activation.

Non-polarized contacts
304 stainless steel contacts
ABS plastic housing, weight 112 g

Price on request

Original manufacturer documents: Specifications & instructions (EN) · Sanjiang CCC Catalogue (EN) · CCC system installation guide (EN) · CCC Catalogue – Vietnamese translation (part 1) · CCC Catalogue – Vietnamese translation (part 2)

The product has passed inspection under Vietnam's fire-protection (PCCC) regulations.

The manual call point provides output contacts

The push button can be reset.

The push button is non-polarized (no distinction between positive and negative), which makes installation on site very convenient.

Technical specifications

Non-polarized conventional manual call point
Light weight: 112g
Contacts made of 304 stainless steel, durable in hot and humid weather such as Vietnam's and suitable for installation in coastal areas.
Normal-state current 0uA; alarm current <25mA. Housing made of high-grade ABS plastic.

Technical specifications J-SAP-M-A62KE

Model	J-SAP-M-A62KE
Type	Conventional manual call point with telephone jack
Standards	GB 19880-2005
Operating current	Monitoring 0 mA; operating < 25 mA (when connected to input module JK-A52E)
Output contact	Normally open, 0.1 A / 30 VDC
Wiring	2-wire (TO+, TO−); connected to the panel via module JK-A52E
Telephone jack	2-wire fire telephone jack (6.3 mm mono plug); the telephone indicator flashes when correctly connected
Actuating element	Push plastic plate, reset with a special tool, reusable
Indicator	Red: off in normal state, steady on in alarm
Environment	Indoor, −10 °C to +55 °C; humidity ≤ 95 % (40 °C ± 2 °C, non-condensing)
Weight	Approx. 112 g