Fire alarm system · Fire alarm system (EN54)
A9056TI/O module
Key features
- LPCB and CPR approval.
- 2 LED indicators (Monitor/Output).
- Built in terminal resistor.
- Normally open/close contact signal is selected by jumper.
Price on request
The A9056T I/O module (A9056T for short) is used with SEC3002 fire alarm control panel. It is mainly used to realize an output control for fire linkage equipment (such as smoke dampers, blow valves and fire dampers) and receive the feedback signals of the fire linkage equipment so that a judgment on whether or not the fire linkage equipment is operating normally can be done.
Technical Parameters:
| Executive standard | EN54-18 |
| Operation voltage | loop DC24V (non-polarity);power DC24V(non-polarity) |
| Static current | loop current＜0.8mA; power current<2mA |
| Action current | loop current＜5mA; power current<15mA |
| Capacity of the output control contact | <2A@DC30V |
| Operating indicator | The inspecting indicator blinks once about every 12 seconds in the inspection status or remain lit in the output status; the input indicator will remain lit in the feedback status |
| Operating environment | Indoors, Temperature: -10℃ ～ 55℃; RH: ≤95% (40 ℃±2℃, non condensing) |
| Dimension | 86×86×41(mm, With base) |
| Weight | about 148g(With base) |
